CLARK MASTS FOR MILITARY USERS

SCAM Series Air-operated logo

TODAY'S MAST FOR TOMORROW'S MILITARY SYSTEMS, 70 Kg UP TO 24 METRES

SCAM mast in serviceRUGGED AIR-OPERATED TELESCOPIC MASTS FOR ALL COM-CENTRE, FIELD SHELTER OR VEHICLE MOUNTING APPLICATIONS.

No field mast kit can be easier and quicker to extend, use and retract than a vehicle mounted telescopic type. Over many years the Clark SCAM Series have provided this facility. They are recognised immediately by the square section steel case which protectes the mast and provides attachment points for vehicle mounting or 4 telescopic field legs. Although not light in weight, the solid construction becomes an advantage when erection is required off a vehicle on a hard surface, when picketing and guying is not possible. The original role of these masts was that of carrying VHF/UHF radio relay antennas. These days their great stability is leading them to new applications supporting today's military electronic devices. SCAM Series masts need a two person team to operate; four people in the case of the 21 metre model.


SCAM Mast components

  1. BRIEF SPECIFICATION
  2. Telescopic mast construction, aluminium alloy.
  3. Mast turnable 360 degrees with feeder attached.
  4. Operating temperature range -40 to +55 degrees C.
  5. Antenna attachment 40 mm socket.
  6. Directly takes antennas fitted with draft NATO standard 40 mm diameter spigot.
  7. May be set up guyed or unguyed on slopes up to 24 degrees.
  8. Minimum ground area required 2.5 square metres.
  9. Air pressure from vehicle compressor, battery powered compressor or handpump.
  10. Mast sections light allow to BS1471, HT30TF, anodised green or gold-sand to DF151.
  11. Castings are die cast aluminium LM6 alloy.
  12. Finishes - zinc plating and passivating to DEF903D - paint to DEF1110 or DEF5580 Military Green, Desert Sand or other colours on demand.
  13. Guys of prestretched green or dark red terylene equipped with 'arctic' snap hooks and ball tensioners.

SCAM mast field deployed

SCAM series specifications


Back to Clark Masts Directory

Go to Type PU Masts


EMAIL FORM

A Proud Member of the WEB Assurance Bureau.

Send mail to:
Clark Masts - USA
2347 Romig Rd. Pottstown, PA 19464
1-877-210-2258, 9 A.M. to 5 P.M. Eastern Time
FAX 1-610-369-7786 Eastern Time
EMAIL
Copyright © 2007 FLOATOGRAPH Technologies. All Rights Reserved.
* Patented Components
All materials contained in www.clarkmasts-usa.com are protected by copyright and trademark and shall not be used for any purpose other than private, noncommercial viewing purposes. Derivative works and other unauthorized copying or use of stills, audio and video footage are expressly prohibited.